Sensor&lights
Switch Motion 1
EN0875
- ON/OFF: the device automatically controls the switching on/off of a lamp through sensor for 45 seconds from detection of presence. Timing and operation are customizable.
- Integrated key for manual switching on/off.
- Suitable also to be installed into profiles.
Switch Motion 2
EN1098
- Costant light output fixed at 20%; in presence of people the light automatically reaches its maximum intensity for during of 60 seconds. Timing and operation are customizable.
- Possibility to connect more devices at the same load.
- Designed for public or private structures in which it is required the automatic control of LED lighting system (e.g. corridors).
- Integrated button for manual switching on/off.
- Suitable also to be installed into profiles.
Switch Motion 60"
EN1192
- ON/OFF: the device automatically controls the switching on/off of a lamp through sensor for 60 seconds from detection of presence. Timing and operation are customizable.
Touch dimmer & Light sensor
EN1059
TOUCH DIMMER WITH LIGHT SENSOR
- ON/OFF with touch sensor and dimming (keeping the presence).
- Brightness is automatically stored and resumed at power on.
- At sudden light increase, IR sensor activates the output for 45 seconds (ideal for installation into furniture, drawers, etc.)
- Presence of one white LED indicating the status (on/off).
- Suitable also to be installed into profiles.
TOUCH DIMMER
- ON/OFF by touch and dimming (keeping the presence).
- Brightness is automatically stored and resumed at power on.
- Presence of one white LED indicating the status (on/off).
- Suitable also to be installed into profiles.
LIGHT SENSOR WITH AUTOMATIC SWITCHING OFF
- At sudden light increase, IR sensor activates the output for 45 seconds (ideal for installation into furniture, drawers, ect.)
- Presence of one white LED indicating the status (on/off).
- Suitable also to be installed into profiles.
CLOSET DOOR SENSOR
- ON/OFF: output be activated when presence is not detected (ideal for installation into wardrobes for detecting closet door).
- Presence of one white LED indicating the status (on/off).
When that LED is turned ON the output is ON
When that LED is turned OFF the output is OFF - The sensor is auto adjusted,
It's enough to install It to a distance lower than 4cm from the closet